|Other Name:||High Modulus Asphalt||Dynamic:||High|
|Application:||Middle, Upper And Lower Layers||Size:||3-5mm, Easy To Melt|
|Color:||Black||Using:||Mixing Into Asphalt Plant|
high modulus asphalt additives,
cement binder mixture asphalt additives,
antistrip additives to asphalt mixture
Long life asphalt pavement
Asphalt Additive Bitumen Additive For Asphalt Cement Binder is mainly used for the middle layer and the upper layer of asphalt pavement. Small dosage and significant effect, dosage is 0.3-0.4% of the asphalt mixture, and dynamic stability can be raised from 1500 to about 15,000, which can effectively improve anti-rutting performance of the road surface, suitable for bus channels, heavy-duty roads, The intersection and other positions.
During the large and medium-sized repair of the road, according to the case of the road ruts, milling the upper layer or milling the upper layer and the middle layer together, and then paving ZTA-RA anti-rutting modified asphalt to prevent ruts to damage the road.
|ZTA-RA Asphalt Additive Bitumen Additive For Asphalt Cement Binder|
3kgs or 4kgs per hot-melt bag, 24 kgs per bag.
|Loading:||16 tons per 20 feet container. 27 tons per 40 feet container.|
|Storage:||ZTA Anti-rutting additive can be stored at room temperature.|
|Transportation:||Convenient to transport, no need special vehicle|
ZTA-RA improves the high temperature performance and the resistance of water loss of asphalt, which reduces the possibility of rutting from high temperature sprinkling in summer.
ZTA-RA raises the adhesion grade of bitumen and stone, both acid aggregate and alkaline aggregate can reach level 5, saving the use of anti-peeling agents/additives, and does not even need to add anti-stripping agent/additives.
The strong viscosity of ZTA-RA increases the softening point of asphalt, reduces the sensitivity to temperature of asphalt, and increases the adhesion of bitumen to mineral aggregates.
The elastic component of ZTA-RA has a function of recovering the elastic recovery of the deformation portion of the pavement at a higher temperature, thereby reducing reduces the risk of permanent deformation of the pavement.
There is no risk of modified bitumen isolation, saving step to bitumen modification, saving energy consumption. The asphalt mixture has excellent water resistance, good bonding performance and reinforcement effect.
Asphalt Additive Bitumen Additive For Asphalt Cement Binder is mainly used in the middle, upper and lower layers of asphalt pavement construction and maintenance engineering for all types of surface and base layers.
* Heavy-duty channelized traffic roads, long and steep roads, and roads in mountainous and heavy hilly areas with more sharp bends, which are more severely damaged by rutting.
|Beijing Zhongtian Road-Tech Co.,Ltd. is the Board of Directors of China Transportation Association and Transportation Committee of China Technological Market Association, with expert technical R&D team, continuous innovation ability, rich engineering experience and sufficient capacity. Also we participated in designated road material industry standard certificates.|
|Headquarters in the capital Beijing, 3 product production bases in Baoding and Handan, Hebei and Ordos, Inner Mongolia. With an annual output of 600,000 tons of asphalt additives, 500,000 tons of fusible powder additives (asphalt SBS), 5,000 tons of drainage pavement additives / porous pavement additives, 40,000 tons of anti-rutting agent / anti-rutting additives ARA / heavy load road additives, 40,000 tons of ultra-thin pavement overlay additives (preventive maintenance additives), 1,000 tons of flame-retardant & smoke-suppressing pavement for tunnel additives, 1,000 tons of melt snow and anti-freeze pavement additives. 5,000 tons of crack sealant and 2 million meters of adhesive crack tape, it can fully meet custom needed.|
Contact Person: Shakiya