Cold Bitumen Adhesive Special for Producing Cold Bitumen Mix for Potholes Repair
ZTA Cold Bitumen Adhesive is used to produce cold patch materials for pits, and high-performance cold patch materials can be produced locally with appropriately graded stones according to the corresponding process. ZTA cold patch asphalt has strong adhesion to the stone, and the mixed cold patch has high strength.
ZTA Cold Bitumen Adhesive is used to produce cold patched asphalt, and the stone can be produced by stirring at 60 °C. There is no black smoke and dust in the production process, and it can be used immediately.
The process of producing cold patch asphalt with ZTA Cold Bitumen Mix is simple, and users can use various forced mixing equipment (mixing buildings, comprehensive maintenance vehicles, mortar mixers) to produce cold patch asphalt.
|Super high quality
|Super high performance
Low cost and easy to use.
High durability and long shelf life.
Drum packaging, easy to transport and use.
Excellent workability: Strong adhesion to aggregates, water peeling resistance.
Simple mixing process: Simple mixing equipment can be directly used.
Energy conservation: Materails heated to 60℃, no black smoke or dust is emitted.
Reduce costs: Save the long-distance transportation cost and time cost of the finished product.
The Cold Bitumen Adhesive is heated to 50-60 degrees Celsius. The aggregate is determined to be heated according to the air temperature. The aggregate does not need to be heated if the ambient temperature is above 25 degrees Celsius. Otherwise, the aggregate is properly heated to about 60 degrees Celsius. Mixing temperature is 50-60 degrees Celsius and it can not exceed 60 degrees Celsius. The dosage of Cold Bitumen Adhesive is 4.3% of cold asphalt mixture weight.
Beijing Zhongtian Road-Tech Co.,Ltd. is the Board of Directors of China Transportation Association and Transportation Committee of China Technological Market Association, with expert technical R&D team, continuous innovation ability, rich engineering experience and sufficient capacity. Also we participated in designated road material industry standard certificates.