Cold Mix Cold Asphalt Road Maintenance Material Repair Asphalt Potholes

    Cold Mix Cold Asphalt Road Maintenance Material Repair Asphalt Potholes is a high-tech road repairing material that can be used around the clock and is suitable for repairing various types of road surfaces in any weather and environment, such as asphalt concrete roads, cement concrete roads, parking lots, airport runway, etc. It has been widely used in the world for its simple operation, long storage, good repair quality, traffic can be opened immediately after construction, wide use and environmental protection.

    Zhongtian pit repair technology meets the requirements of fast, timely and all-weather. With fast construction speed, easy operation and the advantages of construction in winter and rain and snow.

All weather to use, Applicable for rainy and snowy
Used in concrete or bituminous pavements
No need tar coating material
Permanent repair, no need to maintenance at least 10 years
Construction is simple, open to traffic soon
Working temperature is -25℃ to 50℃, can up to 90℃ for extremely hot places.
Shelf life unopen 2 years
100% eco-friendly, cold mixing

Zhongtian Cold Mix Cold Asphalt Road Maintenance Material Repair Asphalt Potholes is best choice to repair potholes, utility cuts, road edges, water main breaks, also be utilized as permanent asphalt patch, trench reinstatements, man hole adjustments.

1 Pit cleaning

Clean up the gravel residue inside and around the pit to be repaired. No debris such as mud ice cubes can be left in the pit. Water in the pit does not affect the construction.

2 Brush interface agent

Brush the interface agent when necessary. For example: repair of cement pavement, repair of highway.

3 Fill the pit with cold fill

Fill enough pits into the pit (a 1m³ pit requires about 2.2 tons of cold fill) until the filler is about 1.5㎝ above the road surface. After filling, it’s better that the center of the pit is slightly higher than the surrounding road surface and is curved. If the pit depth is> 4㎝, the repair material should be filled and laminated layer by layer.

4 Compaction

After laying evenly, choose appropriate compaction tools and methods for compaction according to the size and depth of the repaired area and the actual environment. Such as car tire compaction, manual compaction, vibrating plate compaction compaction ad road compactor compaction. When repairing high-grade roads, the periphery and corners of the repaired area should be fully compacted. After the pits are compacted, the joints are closed with emulsified asphalt or joint tapes.

5 Open traffic

It can be opened to traffic immediately after compaction.

    Zhongtian Cold Mix Cold Asphalt Road Maintenance Material Repair Asphalt Potholes can be widely used in municipal roads, general roads, highways, parking lots, airport runways, tunnel damage of road asphalt concrete and cement concrete pavement, ruts, municipal road tunneling, repaired pavement, bridge expansion joints, heavy load pavement , repair and maintenance of road traffic and special road.

    Beijing Zhongtian Road-Tech Co.,Ltd. is the Board of Directors of China Transportation Association and Transportation Committee of China Technological Market Association, with expert technical R&D team, continuous innovation ability, rich engineering experience and sufficient capacity. Also we participated in designated road material industry standard certificates.