|
Product Details:
|
| Other Name: | Asphalt Modifier | High Modulus: | High |
|---|---|---|---|
| High Temperature Performance: | Good | Dynamic Stability: | High |
| Application: | Asphalt Pavement | Use Way: | Mixing With Stones |
| Packing: | Packed In Hot Melt Bag | Delivery: | Based On Order Quantity |
| High Light: | High Modulus Asphalt Modifiers,dynamic Stability Composite Asphalt Modifiers,driveway binder asphalt road repair |
||
Long life asphalt pavement
High Modulus Composite Asphalt Modifiers for Road Pavement is mainly used for the middle layer and the upper layer of asphalt pavement. Small dosage and significant effect, dosage is 0.3-0.4% of the asphalt mixture, and dynamic stability can be raised from 1500 to about 15,000, which can effectively improve anti-rutting performance of the road surface, suitable for bus channels, heavy-duty roads, The intersection and other positions.
Asphalt Modifiers could be customized, modified asphalt also could be customized according to specific performance demand. Specific products could present distinguish performance like noise reduction, aging resistance, fatigue resistance, rutting resistance, reflective cracking resistance. And, our products could cover almost all the mixture types and all the situation where modified asphalt were required.
Specification:
|
Properties |
Modified asphalt mixture |
Specification requirements |
||
|
Dosage of asphalt additive |
Data |
|||
|
Stability(KN) |
0.3% |
12.7 |
≥8.0 |
|
|
Flow value(0.1mm) |
3.7 |
1.5~4.0 |
||
|
Residual stability(%) |
89 |
≥85 |
||
|
Splitting strength(MPa) |
1.58 |
/ |
||
|
Freeze-thaw splitting strength ratio TSR(%) |
89.9 |
≥80 |
||
|
Low temperature bending failure strain(με) |
3004 |
≥2800 |
||
|
Dynamic stability(freq./mm) |
Standard condition: 60℃,0.7MPa |
0.1% |
4256 |
≥2800 |
|
0.2% |
8077 |
|||
|
0.3% |
11605 |
|||
|
0.4% |
18347 |
|||
|
Harsh conditions: 70℃,0.85MPa |
0.3% |
7082 |
/ |
|
Packing:
3kgs or 4kgs per hot-melt bag, 24 kgs per bag.
500KGS/ TON OF BAG, 25KGS/BAG, OR AS CUSTOMZIED
Loading:
15 tons per 20 feet container. 27 tons per 40 feet container.
a. energy saving and environmental protection;
b. noise reduction;
c. crack resistance at low temperature;
d. high temperature stability;
e. stress-absorbing ability;
f. good durability;
High Modulus Composite Asphalt Modifiers for Road Pavement is mainly used in the middle, upper and lower layers of asphalt pavement construction and maintenance engineering for all types of surface and base layers. ZTA-RA heavy load traffic pavement asphalt additive are widely used in mountainous roads, especially on uphill sections, heavy-duty sections, crossroads, bus harbors, highways and high-grade roads, airport runways, municipal roads, bus lanes, container yards, various repaired pavements. , and the addition of asphalt concrete pavement, etc., especially suitable for high temperature areas.
Beijing Zhongtian Road-Tech Co.,Ltd. is the Board of Directors of China Transportation Association and Transportation Committee of China Technological Market Association, with expert technical R&D team, continuous innovation ability, rich engineering experience and sufficient capacity. Also we participated in designated road material industry standard certificates.
Contact Person: Shakiya
Tel: 86-15032577974
Fax: 0086-010-6789-3003
